Microphone stops working one minute into the conversation.

May 31, 2017, 10:13 am

≫ Next: win10蓝屏日志，求帮忙找出原因

≪ Previous: Non funziona più la fotocamera

$

0

0

I recently updated Skype.  Ever since I did, every time I receive or make a call, my microphone stops working after about one minute.  The only way to get it to work again is to restart the computer and then it quits working again, after about one minute.

I have gone through the settings many times and tried different choices.  I have uninstalled and reinstalled Skype three times.  I have tried three different headsets.  I even bought a new sound card and installed it.  I am at a loss as to what else to try. 

This is a real problem for me because I use Skype on a daily basis.  Can someone help me?

Thanks,

Demetrius

---

win10蓝屏日志，求帮忙找出原因

May 31, 2017, 10:14 am

≫ Next: Cannot Copy text in MS Edge Browser

≪ Previous: Microphone stops working one minute into the conversation.

$

0

0

Microsoft (R) Windows Debugger Version 6.10.0003.233 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\060117-9562-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path.           *
* Use .symfix to have the debugger choose a symbol path.                   *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is: 
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 15063 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0xfffff801`55613000 PsLoadedModuleList = 0xfffff801`5595f5a0
Debug session time: Thu Jun  1 00:57:57.402 2017 (GMT+8)
System Uptime: 0 days 0:43:19.142
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
................................................................
............................................................
Loading User Symbols
Loading unloaded module list
...................
Cannot read PEB32 from WOW64 TEB32 00009212 - Win32 error 0n30
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, ffffdc8a7f9bb636, 0, 0}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!KPRCB                                      ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Probably caused by : hardware_ram ( PAGE_NOT_ZERO_VISTA )

Followup: MachineOwner
---------

 *** Memory manager detected 37394 instance(s) of page corruption, target is likely to have memory corruption.

Cannot Copy text in MS Edge Browser

May 31, 2017, 10:14 am

≫ Next: Archivo extensión pwi

≪ Previous: win10蓝屏日志，求帮忙找出原因

$

0

0

Hello,

I have a webpage with a large multi-page DevExpress table.

I am attempting to select and copy text within the cells but Edge does not allow text selection. 

Instead it tries to move to the next page.  I can select and copy the table headers and other text on the page. 

Copy does work in IE11, Chrome and FireFox.

Is there any way to turn off the slide navigation in Edge and enable text select instead?

Thanks

Karen

Archivo extensión pwi

May 31, 2017, 10:15 am

≫ Next: Zmiana komputera

≪ Previous: Cannot Copy text in MS Edge Browser

$

0

0

Buenas tardes, tengo unos archivos con extensión pwi de una Palm HP de hace varios años y estos archivos son grabaciones que hice en su momento pero que ahora no puedo abrir, los tengo en mi PC pero he intentado con varios programas sin poder lograrlo, ojala me puedan ayudar. gracias.

Zmiana komputera

May 31, 2017, 10:16 am

≫ Next: Surface Pro 4 slow wifi when connected to external monitor

≪ Previous: Archivo extensión pwi

$

0

0

Niedługo zamierzam zmianę komputera(całej jednostki) w związku z czym mam pytanie odnośnie systemu. Posiadam system Windows 7 na płycie oraz klucz. System został zaktualizowany do wersji Windows 10. Po przeniesieniu sytemu ze starego komputera na nowy będzie możliwość zaktualizowania Windowsa 7 na Windowsa 10 lub zamiast Windowsa 7 zainstaluje się już Windows 10?

Surface Pro 4 slow wifi when connected to external monitor

May 31, 2017, 10:17 am

≫ Next: Was this a fake microsoft warning?

≪ Previous: Zmiana komputera

$

0

0

I've recently purchased a Surface Pro 4 together with an external LG 27" 4k monitor.

They are connected by a simple mini displayport to displayport cable, which works just fine  Now everytime I connect the monitor to the Surface, suddenly the internet connection speed slows down drastically or even stops working at all.

Has anyone experienced a similar issue or knows what the problem might be?

Thanks in advance!

Was this a fake microsoft warning?

May 31, 2017, 10:17 am

≫ Next: Not getting notifications from Answers

≪ Previous: Surface Pro 4 slow wifi when connected to external monitor

$

0

0

SCAM ON FACBOOK

Below are the web addresses from our search engine 'History' log that led my mom from a story about Prince William (1) on Facebook to a fake Microsoft website with a pop up (2) saying the computer had been infected by a virus that would steal all financial information from the computer and other files (about 10 different things were listed) if we did not immediately ring a Dublin number (starting 01).

Any advise appreciated. Thanks

1. https://l.facebook.com/l.php?u=http%3A%2F%2Ftechntoggle.com%2Fwilliam&h=ATPkV9ZQbsxct3J4lctF2dntcWqAJ5kMRjdOK6-B3vnDowGbIInE4_QS-hOnBv7a7YgEQBd72eRokLIDrMS_lIfavPlHnDvVOZX1e9LT41zq3pl0rZZS_WZ3h77HRSS54zOeHFtnQCc&enc=AZMvp0Lk_ACQ4XraGU2BOHF0hKlCvw0xlVhLtNlfssZL6ZHAm5jLy_pFsmoBphUXbe1m0jc41izmod90S1kP7sSF2RTF9NeDZ-yqjUrpH2IToSjHh2Y6QOlDcUZPRDnfgfRSZMBPTJLZNPIVoQzVvwze5d8dCiwUjs_uN3TR2cXorgPU1ovDGiGAcKT1jgMKb9PfFVyfRkRnWpxGRW-QeGwv&s=1&sig=96077

2. Microsoft Official Support s3-us-west-2.amazonaws.com

Not getting notifications from Answers

May 31, 2017, 10:18 am

≫ Next: Excel vba copy certain text in email body.

≪ Previous: Was this a fake microsoft warning?

$

0

0

I have opted the "Notify me when someone responds to this post ". I am not getting any. 

May I know what is the reason.

---

Excel vba copy certain text in email body.

May 31, 2017, 10:19 am

≫ Next: Code d'erreur 0x800705b4 pour Windows Defender

≪ Previous: Not getting notifications from Answers

$

0

0

Hi all,

I found the below code in this website that copies the email body from a specified folder in outlook and pastes it to excel. However, the problem is I want a specific text only to be copied to excel. I inserted the email sample and I want the highlighted item to be copied.

CODE:

Option Explicit
 Public gblStopProcessing As Boolean
 Sub ParseBlockingSessionsEmailPartOne()
 ' This macro requires Microsoft Outlook Object Library (Menu: Tools/References) be available
 Dim wb As Workbook
 Dim ws As Worksheet
 Dim objFolder As Object
 Dim objNSpace As Object
 Dim objOutlook As Outlook.Application
 Dim lngAuditRecord As Long
 Dim lngCount As Long
 Dim lngTotalItems As Long 'Count of emails in the Outlook folder.
 Dim lngTotalRecords As Long
 Dim i As Integer
 Dim EmailCount As Integer 'The counter, which starts at zero.
 '
  On Error GoTo HandleError
  'Application.ScreenUpdating = True
  'Application.ScreenUpdating = False
 '
 Sheets("Merge Data").Select
 '
     ' Initialize:
      Set wb = ThisWorkbook
      lngAuditRecord = 1 ' Start row
      lngTotalRecords = 0
 '
     ' Read email messages:
      Application.ScreenUpdating = False
      Set objOutlook = CreateObject("Outlook.Application")
      Set objNSpace = objOutlook.GetNamespace("MAPI")
 '
     ' Allow user to choose folder:#
      Set objFolder = objNSpace.pickfolder
     ' Check if cancelled:
      If objFolder Is Nothing Then
          gblStopProcessing = True
          MsgBox "Processing cancelled"
         Exit Sub
      End If
 '
      lngTotalItems = objFolder.Items.Count
      If lngTotalItems = 0 Then
          MsgBox "Outlook folder contains no email messages", vbOKOnly + vbCritical, "Error - Empty Folder"
          gblStopProcessing = True
         GoTo HandleExit
      End If
     If lngTotalItems > 0 Then
          On Error Resume Next
              Application.DisplayAlerts = False
              wb.Worksheets("Merge Data").Delete
              'wb.Worksheets("Audit").Delete
              Application.DisplayAlerts = True
          On Error GoTo HandleError
          wb.Worksheets.Add After:=Worksheets(Worksheets.Count)
          Set ws = ActiveSheet
          ws.Name = "Merge Data"
         
         'Insert Title Row and Format                 NOTE:  THE MACRO CAN BE USED TO PARSE OUT OTHER PARTS OF AN EMAIL.
         '                                                   I JUST COMMENTED OUT THE LINES NOT USED FOR THE CURRENT PROJECT.
          'ws.Cells(1, 1) = "Received"
          ws.Cells(1, 1) = "Email Body"
          ws.Cells(lngAuditRecord, 2) = "Subject"
          'ws.Cells(lngAuditRecord, 4) = "Attachments Count"
          'ws.Cells(lngAuditRecord, 4) = "Sender Name"
          'ws.Cells(lngAuditRecord, 5) = "Sender Email"
          ws.Range(Cells(lngAuditRecord, 1), Cells(lngAuditRecord, 1)).Select
          Selection.EntireRow.Font.Bold = True
          Selection.HorizontalAlignment = xlCenter
         
          'Populate the workbook
          For lngCount = 1 To lngTotalItems
              Application.StatusBar = "Reading message " & lngCount & " of " & lngTotalItems
                 i = 0
                 'read email info
                 While i < lngTotalItems
                     i = i + 1
                     If i Mod 50 = 0 Then Application.StatusBar = "Reading email messages " & Format(i / lngTotalItems, "0%") & "..."
                     With objFolder.Items(i)
                         'Cells(i + 1, 1).Formula = .ReceivedTime
                         Cells(i + 1, 1).Formula = .Body
                         Cells(i + 1, 2).Formula = .Subject
                         'Cells(i + 1, 4).Formula = .Attachments.Count
                         'Cells(i + 1, 5).Formula = .SenderName
                         'Cells(i + 1, 6).Formula = .SenderEmailAddress
                     End With
                 Wend
                 'Set objFolder = Nothing
              ws.Activate
          Next lngCount
          lngTotalRecords = lngCount
        
         'Format Worksheet
             Columns("A:A").Select
             Selection.ColumnWidth = 255
             Cells.Select
             Selection.Columns.AutoFit
             Selection.Rows.AutoFit
             With Selection
                 .VerticalAlignment = xlTop
             End With
             Range("A1").Select
     End If
 '
 ' Check that records have been found:
      If lngTotalRecords = 0 Then
          MsgBox "No records were found for import", vbOKOnly + vbCritical, "Error - no records found"
          gblStopProcessing = True
          GoTo HandleExit
     End If
 '
     With Selection
         Cells.Select
         .VerticalAlignment = xlTop
         .WrapText = True
     End With
     Range("A1").Select
 '
HandleExit:
      On Error Resume Next
      Application.ScreenUpdating = True
      Set objNSpace = Nothing
      Set objFolder = Nothing
      Set objOutlook = Nothing
      Set ws = Nothing
      Set wb = Nothing
      If Not gblStopProcessing Then
             MsgBox "Processing completed" & vbCrLf & vbCrLf & _
                "Please check results", vbOKOnly + vbInformation, "Information"
      End If
 'Call ParseBlockingSessionsEmailPartTwo
      Exit Sub
 '
HandleError:
     MsgBox Err.Number & vbCrLf & Err.Description
     gblStopProcessing = True
     Resume HandleExit
 End Sub

Code d'erreur 0x800705b4 pour Windows Defender

May 31, 2017, 10:22 am

≫ Next: PROBLEMI CON NOTE A PIE' DI PAGINA

≪ Previous: Excel vba copy certain text in email body.

$

0

0

Depuis quelques mois, mon anti-virus (Windows Defender) se désactive automatiquement et lorsque je veux le réactiver ce message apparaît : Impossible d'activer la protection en temps réel

Cette opération s'est terminée car le délai d'attente a expiré.

Cliquez sur Aide pour plus d'informations sur ce problème.

Par contre la partie "Définitions de virus et de logiciels espions : À jour

Et mon anti-virus a détecté un cheval de Troie mais j'ai déjà essayer de le supprimer mais il reste toujours sur mon pc. Ce cheval de Troie ouvre sans mon autorisation des fenêtres et me remet sur ma page d'accueil de mon navigateur sinon il ne fait rien d'autre sur mon ordinateur.

Merci de bien vouloir m'aider

PROBLEMI CON NOTE A PIE' DI PAGINA

May 31, 2017, 10:22 am

≫ Next: Dossier 1387304187

≪ Previous: Code d'erreur 0x800705b4 pour Windows Defender

$

0

0

Buonasera, 

utilizzo word 2016 su mac. 

Due sono i problemi delle note.

1) Non riesco a giustificare sul margine di sinistra il testo della nota. 

In altre parole io vorrei i numerini delle note uno sotto l'altro allineati e il secondo rigo allineato al primo e non così.

[1]Theodor W. Adorno, Mahler.A Musical Physiognomy, transl.by E. Jephcott Chicago, University of Chicago,1988 (orig. ed.Theodor W. Adorno, Mahler. Eine Musikalische Physiognomik, Frankfurt am Main SuhrKamp Verlag, 1971), pp. 60-81.

[1]Ivi, p. 63.

[1]Lawrence Kramer,“As if A Voice Were in Them”: Music, Narrative, and Deconstruction,Music as Cultural Practice  1800-1900, Berkeley, CA–London, 1990,p. 189.

[1]Carolyn Abbate,Unsung Voices: Opera and Musical Narrative in The Nineteenth Century, Princeton, Princeton University Press, 1996, p.

N.B. nel fare copia incolla qui i numeri delle note sono diventati numeri tra parentesi quadre. 

2) eccessivo spazio tra una nota e l'altra come nel caso sotto; ho provato in tutti i modi a ridurre lo spazio ma nulla!

Jörg Rothkamm,Gustav Mahlers Zehnte Symphonie, Entstehung, Analyse, Rezeption, Frankfurt am Main-NewYork, P. Lang, 2003, p.106; 

 

 

[1]t. w. Adorno,Mahler. A Musical Physiognomy, transl. by Edmund.Jephcott, cit., p. 87.

Grazie a chi risponderà. 

Angelo

Dossier 1387304187

May 31, 2017, 10:22 am

≫ Next: Jeg har ett problem med en annen nabo som logger seg på mitt nettverk uten tillatelse.Kan jeg forandre ip-adresse eller ? jeg vil anmelde dette til politiet.

≪ Previous: PROBLEMI CON NOTE A PIE' DI PAGINA

$

0

0

Bonjour, suite à des conversations avec vos opérateurs, par chat et au téléphone (0970019090), voici le détail d'un incident encontre ce jour avec la version installée de W10 ce 31/05/2017 :

Outlook Express, configuré en serveur POP ... : les messages sont recus en local et supprimés sur le serveur. Ils sont composés et emis de mon PC et non archivés sur le serveur distant.

La totalité des messages, reçus comme émis à disparu de mon dossier local, sans qu'a aucun moment je n'ai été averti de cette manière de procéder !

Ces messages contiennent tous les historiques  avec mes fournisseurs et mes relations, mes commandes et réclamations, il me faut absolument les retrouver.

J'espère qu'ils ont été sauvegardés dans un espace de travail dont j'attends de votre part et de manière urgente l'adresse et le mode de restauration.

Merci

Yves Monteil

Paris

Jeg har ett problem med en annen nabo som logger seg på mitt nettverk uten tillatelse.Kan jeg forandre ip-adresse eller ? jeg vil anmelde dette til politiet.

January 1, 2013, 10:01 am

≫ Next: Windows10 Dos Popup alle 30min ??

≪ Previous: Dossier 1387304187

$

0

0

Jeg har ett problem med en annen nabo som logger seg på mitt nettverk uten tillatelse.Kan jeg  forandre ip-adresse eller ? jeg vil anmelde dette til politiet.

Windows10 Dos Popup alle 30min ??

April 1, 2016, 2:10 pm

≫ Next: Lock Screen Background Image No Longer Available On High Contrast Desktop Themes

≪ Previous: Jeg har ett problem med en annen nabo som logger seg på mitt nettverk uten tillatelse.Kan jeg forandre ip-adresse eller ? jeg vil anmelde dette til politiet.

$

0

0

Hallo

seitdem ich Windows 10 installiert habe springt alle 30 Minuten ca. ein DOS Popup auf, dadurch fliege ich aus jeder Vollbildanwedung.

Was kann ich dagegen tun ?

Lock Screen Background Image No Longer Available On High Contrast Desktop Themes

October 4, 2016, 3:30 am

≫ Next: Windows 10 | Error al intentar restaurar

≪ Previous: Windows10 Dos Popup alle 30min ??

$

0

0

The Lock Screen background image is no longer available on High Contrast Desktop Themes after the Feature Update from September 29, 2016 — KB3194496 (OS Builds 14393.222) for Windows 10 Version 1607.

Why was this done?  Can it be brought back (or the update uninstalled)?  Since I use a High Contrast Desktop Theme, I would like to have this back.

---

Windows 10 | Error al intentar restaurar

March 25, 2017, 7:14 pm

≫ Next: Filtros personalizados en Excel Online

≪ Previous: Lock Screen Background Image No Longer Available On High Contrast Desktop Themes

$

0

0

Hola! no me deja restaurar windows 10, me dice no se pudo restaurar sistema los archivos no han sido modificados y no pasa nada.

Filtros personalizados en Excel Online

April 5, 2017, 7:07 pm

≫ Next: Office Mobile | No puedo iniciar sesión

≪ Previous: Windows 10 | Error al intentar restaurar

$

0

0

Hola,

Al trabajar en Excel online lo ideal es hacerlo en forma simultánea entre diferentes usuarios en un mismo archivo. El problema es que si se trabaja armando una base de datos y, cada usuario necesita filtrar en forma independiente los datos, esto no es posible porque si un usuario cambia el filtro esto se refleja en el resto de los usuarios.

En Google sheets se pueden hacer filtros personalizados para que cada usuario pueda trabajar sin afectar la vista del resto pero esta función no la hemos encontrado en Excel online.

Si alguien puede ayudarme estaré sumamente agradecido.

Saludos.

Aníbal

Office Mobile | No puedo iniciar sesión

April 6, 2017, 8:24 am

≫ Next: Windows 10 | Habilitar bandeja de correo prioritario en aplicación Correo

≪ Previous: Filtros personalizados en Excel Online

$

0

0

Buenas tardes comunidad Quisiera hacer una consulta acerca de las aplicaciones Office para Android al querer ingresar a la cuenta Office 365 es tanto Word como Excel me dicen qué no puedo o sea se cierra la aplicación sin embargo cuando trabajo sin conexión la aplicación no tiene ningún problema pero no puedo ingresar a mi cuenta entonces no tengo disponible todo el potencial de Office para si alguien pudiera tener una respuesta le agradecería mucho estuve viendo algunos comentarios y creo que es más un problema de la aplicación para Android que en realidad de Microsoft Así que Bueno muchísimas gracias

Windows 10 | Habilitar bandeja de correo prioritario en aplicación Correo

April 8, 2017, 3:49 pm

≫ Next: Windows 10 | Windows Defender protección en tiempo real dehabilitada

≪ Previous: Office Mobile | No puedo iniciar sesión

$

0

0

Hola: Luego de Actualizar a la version 1703 (Creator) todos los correos Outlook o Hotmail (Poseo Varios) al abrir la app Correo de Windows me aparece la opción "Prioritarios".

Porque razón otra cuenta que poseo y utilizo habitualmente no me aparece esta opción "Prioritarios" ???

Desde ya Gracias

Windows 10 | Windows Defender protección en tiempo real dehabilitada

April 10, 2017, 12:18 pm

≫ Next: Windows 10 | Memoria RAM utilizable es menor a la instalada

≪ Previous: Windows 10 | Habilitar bandeja de correo prioritario en aplicación Correo

$

0

0

Hola, tengo Windows defender instalado pero me dice que la opción de protección en tiempo real esta deshabilitada y cuando pido ayuda me dice que la directiva de grupo bloquea este programa, alguien sabe que puede estar pasando?